Installing

Back | Up | Next

The following steps guide the user through the installation process of the USB to TTL Cable.

Step 1:

Insert the USB to TTL cable into a free USB slot on your PC.  Windows should detect the cable and open the 'Found New Hardware Wizard'

Step 2:

Answer "No, not this time" to the Question "Can Windows connect to Windows Update to search for software?" and Click Next to continue

Step 3:

Insert the Driver CD that was supplied with the Cable and Click Next to continue

Step 4:

The software drivers have not been Windows Logo Testetd, therefore click on 'Continue Anyway'

Step 5:

The driver software for the USB to Cable has been installed, Click Finish to close the Wizard.

Step 6:

The installation process now continues to install the virtual com port on your PC, the steps are very similar to steps 2,3 and 4 above, When the software is completed the following dialog box appears:

Click Finish to close the Wizard and complete the installation process.

Windows will have assigned a COM port number for the USB to TTL cable, this can be found by looking in the Windows Device Manager.  Click here to see how to do that.

 

 

Send mail to webmaster@avitresearch.co.uk with questions or comments about this web site.
Copyright © 2007 AVIT Research Ltd
Last modified: 10/02/07