DRIVERS CAN BE DOWNLOADED FROM HERE

AVIT Research FTDI based USB to TTL Serial Cable are designed using the de facto standard FT232RQ chipset.  The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.

The cables are available with a 6-way SIL, 0.1" connector and are available at TTL levels of +5v and +3v3 in BLACK or TRANSPARENT with Rx and Tx LEDs.

• Simple and Easy way to give USB support to your designs

• Connects directly to microcontroller UART or I/O pins

• PC communicates as a standard serial device

• All circuitry integrated into sleek, moulded USB plug

• Compatible with legacy software.

• Based on FTDI FT232R

• 6-way connector (Gnd, CTS, VCC, TX, RX, and RTS)

• Supports data rates up to 3 Mbaud allowing a significant performance increase over a standard serial port.

• Allows devices to be powered from the USB port.

• All I/O are protected from shorts and ESD.

• Drivers Supplied by FTDI

• Can by customised for own branding (USB VID, PID, Descriptors etc.)

• Cable Length 1.80m (6 ft)

*Power supply voltage is dependant on the USB port to which the cable is connected. The minimum specified is the expected worst case when connected through a bus-powered hub that conforms to the USB specification.